And if applicable motorline preference. I will message you with.
3'0" X 7'0" Commercial Aluminum Storefront. W/ a 10 inch Bottom Rail and frame (no transom). In the pictures the dark bronze door is a LH door. The other pictures are of the corner construction. Frame is KD (knocked down, requires minor assembly).
Installation instructions are at the bottom of this detail. I will get a rate quote (message if you have a motorline preference). The frame dimensions are 39 1/2" x 85 3/4". Allowing for shimming, the Rough Opening needed is 40" x 86". Local pick-up is NOT available.
We will not be liable for any incidental, indirect, consequential, or damages of any nature arising from the sale of any item after the item has left our facility. All emails are usually answered within 24 hours.Position assembled frame plumb and square in opening. Drill and countersink anchor holes for anchor screws. Note: Mount all hardware before putting the door frame in the framed opening closer to. Be mounted after everything is installed.
Holes should be started 6 from the bottom of each jamb. Drill at least 3 holes evenly spaced through the glazing pocket of header, they will be concealed by the door stops. Set threshold in bed of sealant or mastic. Shim and secure jambs and header in opening. Secure the threshold (if supplied) to the floor.
Recheck that the shims and anchors are square with the door. All the gaps between the door and frame should be even. The felt should be facing the door. The item "ADA 10 BOTTOM RAIL LEFT Hand Bronze 3'0 X 7'0 STOREFRONT DOOR, FRAME & CLOSER" is in sale since Saturday, February 3, 2018. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Doors".
The seller is "storefrontdoorsusa" and is located in Blairsville, Georgia. This item can be shipped to United States.